Readers ask: What Is The Soil Of Bethlehem?

What is bethlehem soil?

GEOGRAPHIC SETTING: Bethlehem soils occur on ridgetops and side slopes in the upper part of the thermic Piedmont. They form in residuum weathered from high-grade metamorphic rocks such as sillimanite schist, phyllite schist, and mica schist. Slopes range from 2 to 45 percent.

What is Wagram soil?

Wagram loamy sand, 6 to 10 percent slopes (WaC). This is a well-drained soil on short side slopes of uplands and stream terraces. It occurs in long, narrow areas that are 3 to 10 acres in size. The subsoil is olive-yellow to brownish-yellow, friable sandy clay loam and sandy loam to a depth of 60 inches or more.

What is Evard soil?

TYPICAL PEDON: Evard sandy loam – forested. A–0 to 5 cm (0 to 2 inches); very dark grayish brown (10YR 3/2) sandy loam, weak fine granular structure; very friable; nonsticky, nonplastic; many fine and few medium roots; strongly acid; abrupt smooth boundary.

What is a Level 4 soil test?

A Level 4 Soil Survey is a high intensity soil survey that provides much greater detail than a Level 3 Soil Survey. Level 4 Soil Surveys are sometimes required for difficult lots or poor soil areas. The tests evaluate a soils ability to percolate (“perc”) wastewater from a septic tank.

What is Appling soil?

The Appling series consists of very deep, well drained, moderately permeable soils on ridges and side slopes of the Piedmont uplands. These soils are deep to saprolite and very deep to bedrock. They formed in residuum weathered from felsic igneous and metamorphic rocks of the Piedmont uplands.

You might be interested:  Readers ask: Who Was King Of Bethlehem?

What is hard labor soil?

The Hard Labor series consists of very deep, moderately well drained, slowly permeable soils that formed in material weathered from felsic igneous and metamorphic rock, primarily granite and granite gneiss. The Hard Labor soils are on summits and side slopes of the Piedmont uplands. (Colors are for moist soil.)

What is a soil series name?

The name of a soil series is the common reference term, used to name soil map units. Soil series are the most homogenous classes in the system of taxonomy. “Official Soil Series Descriptions” define specific soil series in the United States, Territories, Commonwealths, and Island Nations served by USDA – NRCS.

What is a Level 2 soil test?

Level 2 – This requires the client to provide us with a boundary survey and a topographic map of the tract. A Level 2 soil map is used by developers for subdivision planning, including road lay-out and potential lot configurations.

What is a good percolation rate for soil?

For soils to effectively treat effluent, percolation rates must be between 10 and 60 minutes per inch of percolation. You need at least 20 to 21 hours to do a standard percolation test requires. This creates a worst-case scenario in the soil.

Leave a Reply

Your email address will not be published. Required fields are marked *